Froth-Pak Two Component Foam

Froth-Pak® is a foam machine in a carton. Chemical curing allows two-part polyurethane foam to be dispensed, expand and become tack-free in seconds. Froth-Pak® will skin over in 30–40 seconds and be completely cured in under one minute. Froth-Pak® is typically used as a foam-insulating sealant to fill cavities, wall and floor penetrations, cracks and expansion joints.

FROTH-PAK™ Foam Sealant Kit (W-FRPK12, W-1FRPK12, W-FRPK180, W-FP600)

FROTH-PAK™ Foam Sealant is a two-component, quick-cure polyurethane foam that fills cavities, penetrations, cracks and expansion joints. FROTH-PAK™ Foam Sealant can also be used as a sealant and void fill in many roofing applications. FROTH-PAK™ is a chemically cured foam, which significantly reduces curing time. FROTH-PAK™ dispenses, expands and becomes tack-free in seconds. It skins over in 30-40 seconds and completely cures in minutes, depending on temperature.

As an air sealant, FROTH-PAK™ Foam Sealant is ideal for many home applications, including:

• Roof and wall junctions
• Wall and attic penetrations
• Electrical, mechanical and plumbing penetrations
• Other gaps, cracks or crevices in the building envelope

For applications in the United States that require a flame spread rating of 25, use FROTH-PAK™ FS Foam Insulation to meet building code specifications. 

FROTH-PAK™ Foam Sealant can be used in either interior or exterior settings. If used in an exterior setting, a coating must be applied for ultraviolet (UV) protection.

FROTH-PAK™ FS Foam Insulation (U.S. Only) (W-FP200CA, W-FP620CA)

FROTH-PAK™ FS Foam Insulation is a two-component, quick-cure polyurethane foam that fills cavities, cracks and expansion joints for insulation and air sealing.

The Class A rating (flame spread of 25 or less) of FROTH-PAK™ FS Foam Insulation allows its use in residential wall, attic and crawl space, and light commercial building applications in the United States. Available in portable, self-contained kits or larger, refillable cylinders, FROTH-PAK™ FS Foam Insulation is an ideal choice for gaps, cracks and penetrations greater than 3" and hard-to-reach locations such as rim joists and band joists.

AccuVent Venting Systems

AccuVent is an excellent attic ventilation system that allows you to insulate to the entire outer wall of the building, and is simply installed with only 6 staples. Prevents wind washing and drifting of insulation. Works with either blown-in or batting insulation types. Sold in bundles of 50, they conveniently stack flat to minimize shipping expense.

Please see our online catalog or contact us for:

• Ansell Cut Protection Glove
• Insul-Knife