Top of the page

Comfort-Air 400 Series Diskit P100 Elastomeric Respirator, Medium/Large

Item No. W-DT4MLDKP100
The Comfort-Air 400 Series Diskit P100 Elastomeric Respirator (Medium/Large) is APF 10 Osha silica dust compliant and protects against oil & non-oil based particulate aerosols. Molded from elastomeric rubber provides comfort and durability. These low maintenance 400 series masks can be used up to 30
Suggested Retail Price $24.95
Price $10.62
Price per Each
Excl. Tax
Each

Description

The Comfort-Air 400 Series Diskit P100 Elastomeric Respirator (Medium/Large) is APF 10 Osha silica dust compliant and protects against oil & non-oil based particulate aerosols. Molded from elastomeric rubber provides comfort and durability. These low maintenance 400 series masks can be used up to 30 times and fit over 99.9% of wearers. 

Facepiece low profile design fits under most grinding and welding helmets and provides extended field of vision.  Large inhalation valves (size of a quarter) allow for maximum inhalation so the user can inhale a larger volume of air per breath reducing breathing resistance while increasing user comfort and productivity. 

Exhalation valve strategically positioned under the nostrils and in front of the month ensures hot, exhale air exits the mask immediately. This improves user comfort while improving productivity. Exhalation valve diaphragm has channels that act like a parachute. Traps exhaled air and lifts diaphragm off the valve seat with very little effort. This creates more space for air to exit the mask reducing heat buildup inside the mask, improves user comfort and productivity. 

Rolled sealing flange provides superior comfort and improves fitting capabilities. Does not require user to adjust straps excessively tight. Textured sealing area reduces risk of the mask slipping on the face. This ensures a comfortable seal on a wide variety of facial sizes. Mask is designed to allow for the proper fitting of most safety & prescription eyewear and goggles. 3 Position adjustment allows you to adjust cartridge to three different positions on all Comfort-Air facepiece.

Suitable For: Toxic dusts, mists & fumes; lead dusts & fumes; brake dusts; exotic welding; glass fibers; asbestos (Note: Specific limitations apply for asbestos removal, see OSHA 1910.1001).

Specifications

Description
Comfort-Air 400 Series Diskit P100 Elastomeric Respirator, Medium/Large
Item Category Code
Clearance
Base Unit of Measure
Each

Reviews (0)

There are no reviews yet.

Comfort-Air 400 Series Diskit P100 Elastomeric Respirator, Medium/Large

Item No. W-DT4MLDKP100
The Comfort-Air 400 Series Diskit P100 Elastomeric Respirator (Medium/Large) is APF 10 Osha silica dust compliant and protects against oil & non-oil based particulate aerosols. Molded from elastomeric rubber provides comfort and durability. These low maintenance 400 series masks can be used up to 30
Suggested Retail Price $24.95
Price $10.62
Price per Each
Excl. Tax
Each

Description

The Comfort-Air 400 Series Diskit P100 Elastomeric Respirator (Medium/Large) is APF 10 Osha silica dust compliant and protects against oil & non-oil based particulate aerosols. Molded from elastomeric rubber provides comfort and durability. These low maintenance 400 series masks can be used up to 30 times and fit over 99.9% of wearers. 

Facepiece low profile design fits under most grinding and welding helmets and provides extended field of vision.  Large inhalation valves (size of a quarter) allow for maximum inhalation so the user can inhale a larger volume of air per breath reducing breathing resistance while increasing user comfort and productivity. 

Exhalation valve strategically positioned under the nostrils and in front of the month ensures hot, exhale air exits the mask immediately. This improves user comfort while improving productivity. Exhalation valve diaphragm has channels that act like a parachute. Traps exhaled air and lifts diaphragm off the valve seat with very little effort. This creates more space for air to exit the mask reducing heat buildup inside the mask, improves user comfort and productivity. 

Rolled sealing flange provides superior comfort and improves fitting capabilities. Does not require user to adjust straps excessively tight. Textured sealing area reduces risk of the mask slipping on the face. This ensures a comfortable seal on a wide variety of facial sizes. Mask is designed to allow for the proper fitting of most safety & prescription eyewear and goggles. 3 Position adjustment allows you to adjust cartridge to three different positions on all Comfort-Air facepiece.

Suitable For: Toxic dusts, mists & fumes; lead dusts & fumes; brake dusts; exotic welding; glass fibers; asbestos (Note: Specific limitations apply for asbestos removal, see OSHA 1910.1001).

Specifications

Description
Comfort-Air 400 Series Diskit P100 Elastomeric Respirator, Medium/Large
Item Category Code
Clearance
Base Unit of Measure
Each

Reviews (0)

There are no reviews yet.